Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL PPX™ Resin PPX630 - Asia - (PPE+PP)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL PPX™ Resin PPX630 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl PPX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
NORYL PPX™ 630 resin is a 30% glass reinforced alloy of polyphenylene ether (PPE) + polypropylene (PP). This injection moldable grade exhibits high elongation and high stiffness along with temperature performance, impact resistance, hydrolytic and dimensional stability. NORYL PPX630 resin is an excellent candidate for hot water system exteriors, condensate housings, and printer internals. *See NORYL PPX630F resin for NSF 61.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Índice de fluidez, MFI 2.6 g/10min ASTM D 1238
Temperatura 260 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência à tração no escoamento 79 MPa ASTM D 638
Resistência à tração na ruptura 79 MPa ASTM D 638
Deformação na ruptura 7.7 % ASTM D 638
Módulo de flexão 5550 MPa ASTM D 790
Impacto Izod com entalhe, 1/8 in 165 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 101 J/m ASTM D 256
Temperatura -30 °C -
Resistência ao Impacto Izod, 1/8 in 827 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
DTUL @ 66 psi 155 °C ASTM D 648
DTUL @ 264 psi 133 °C ASTM D 648
Temperatura de amolecimento Vicat 162 °C ASTM D 1525
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1190 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 65 - 75 °C -
Pré-secagem - tempo 2 - 4 h -
Umidade do processamento ≤0.02 % -
Temperatura da massa 260 - 300 °C -
Temperatura do molde 40 - 65 °C -
Zona 1 245 - 290 °C -
Zona 2 250 - 290 °C -
Zona 3 255 - 295 °C -
Velocidade de parafuso 20 - 100 rpm -
Contrapressão 0.3 - 0.7 MPa -
Características
Processamento
Moldagem por injeção
Disponibilidade regional
Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.